5 Best Cheapest 3D Printer Kits – 2016

The 3D Printing industry has recently undergone quite a boom, and more and more people from the regular masses want to enter into this field of being able to print 3D objects in their very own home. While it is really expensive to buy the higher end models, there are few best cheapest 3D printer kits available for less than $1000 which can be used by beginners to get a hang of how 3D printing actually works.

It is also advisable to get a DIY self-assembly kit as that would give you a better idea of how it functions. These have to be assembled on your own, using a guide. This guide comes with the printer but it can also be reviewed online if you want to check out whether you can handle it beforehand.

Also, when you are buying a 3D DIY kit, you need to look into various aspects. While it’s fashionable to get everything in a lightweight these days, in this particular case you might want to opt for a heavier model as these printers tend to shake a lot when printing, and as such run the risk of toppling over or falling off the table if they’re too light. It is also good to look into the filament and see if the machine uses a Bowden extruder or a direct one. The latter tends to slow down the speed and reduce quality so you should go with the Bowden. Finally, here’s a list of 5 of the best and cheapest DIY 3D Printer Kits.

5 Best Cheapest 3D Printer Kits – 2016

Here’s a list of 5 of the best cheapest 3D Printer Kits.

#1. Q3D OneUp – $199

Best cheapest 3D Printer

This is quite a reasonably priced kit with an open Cartesian frame. It prints at a minimal layer of 0.05mm thickness and has a volume of 100 x 100 x 125 mm, with a print speed of 60mm per second. It comes equipped with USB support and a slot for SD cards for direct printing purposes.

The OneUp is optimized for PLA printing but with the optional heated bed upgrade, ABS and Nylon printing that would be easy to go with. Since this is a DIY, Self-Assembly kit, it takes around 2-8 hours to assemble based on user skill set.

#2. He3D Delta DLT180 – $239

He3D Delta DLT180 -3d printer kit

This is a cheap model for those who need volume and speed in their kits. With a volume of 160 x 160 x230 mm, an upgraded heated bed for the demanding filaments like HIPS, Nylon, and ABS, this is a truly great model.

If you’d like to expand your breadth and be able to print in two colors or materials at a single session there’s also available in the additional extruder to fit your needs.

#3. Q3D TwoUp – $279

Q3D TwoUp- cheapest 3d printerThis is simply a larger version of the OneUp model itself. It comes with a larger volume of 175 x 175 x 125mm against a 600mm per second print speed, and its features include USB and SD Card slots. It has a consistent and sturdy build quality with chrome-plated hardened 4140 steel. The option to upgrade to a heated bed is available.

Each kit includes a very stable and lenient extruder,  that makes it easy to get great superior prints with minimal effort. This is a DIY  kit usually takes 2-8 hours to assemble based on user skill level. Basic. The main difference between the OneUp, TwoUp and ThreeUp is the build area, every other specification remains the same.

#4. He3D Tricolor – $314

He3D Tricolor-cheapest 3d printer kit

The great thing about this model, which really gives it a leg up on its other peers is the option to print at three colors or materials at the same time, because of the triple extruder which comes with it. Its build volume is 180 x 230 x 140 mm with features such as the heated plate, and a USB connectivity.

However, it’s quite the difficult machine to assemble and takes quite the skills, patience, and perseverance to get it up and running. However, it’s all made worth it by the results.

#5. Lewihe Play – $77Lewihe Play- Best Cheapest 3D Printer

This is quite the entry level model and the best cheapest 3D printer including simply the electronics, stepper motors and hotted. It has quite a low object volume of 105 x 105 x 130mm. However, that is due in large part because it’s extra compact with dimensions of 210 x 210 x 250 mm, and has a light weight of 2.5 kg, so if portability matters to you, or you don’t have extremely strong needs and are just a curious beginner, this is actually the perfect model for you.

You can now afford the latest technology with the help of the information provided. We hope you have a lot of fun with one of the 5 best cheapest 3D printer kits!

Leave a Reply

Pin It on Pinterest

Share This